Networking/ONIE/Testing+Certification

This page contains information pertaining to testing and certification of ONIE.

Testing

The current ONIE Specification and Testing document is located here:

These documents are based on the 2014-08 and 2014-11 ONIE release.

Prior to submitting a network device for ONIE certification, the following items must be performed:

ONIE image for the device is openly available on the vendor's website
ONIE source code for the device is openly available
- preferably in the main ONIE repository on GitHub
Ensure all other requirements are met as described in the testing document (i.e. asset tracking labels and Quick Start Guide)

The certification process for ONIE will be as follows:

Submit network device(s) to ONIE certification lab
- NOTE: device is not returnable as this device will be used for all future ONIE certifications (on vendor's request)
- The recommended number of devices is 3 per SKU to ensure a working model for the lifetime of the device. However, 1 per SKU is acceptable if the vendor is able to provide parts (RMA) for the lifetime of the device.
Once the device has been received, testing will begin no later than 5 business days
Normal testing results should be available no later than 5 business days after testing has begun
- Test results will be sent directly to vendor and OCP C&I Director (only if device passed)
OCP Foundation will issue certification voucher to vendor upon verification
Vendor is now able to use ONIE Certified logo on website and marketing collateral